High Efficient Knitted Wire Mesh
Knitted mesh is made of either crochet or knitting of various wire
materials including stainless steel, copper, synthetic fiber and
Knitted wire mesh products are applied to those applications
including cryogenic, high temperature, corrosive atmosphere, heat
conductive, high usage, or special service applications.
Our knitted wire mesh is made from all material available in wire
shapes for processing of the following parts: Filters Oil and Air
Breather Elements, Catalytic Converter Mesh Insulator Blanket Mesh,
Mufflers and Silencers, opper Mesh Oil-Bath Separators, ist
Elimination Pads Ground Wire Mesh.
Monel knitted wire mesh has good corrosion resistance in all extreme
environments and it is reasonably conductive and is tough with high
tensile strength, giving good wear characteristics.
Knitted wire mesh made of tinned copper clad steel has the best shielding performance of all wires used in knitted
meshes, combining low contact resistance with a small degree of
permeability. It is not suitable for highly abrasive applications
where the TIN plating may wear away to expose the copper. The
corrosion resistance of tinned copper clad steel knitted wire mesh
is suitable for most applications.
Aluminum knitted wire mesh is mechanically weak and will readily take a
compression set and this combined with its readiness to form a
Stainless steel knitted mesh is often used as a protective final layer over the
other knitted mesh gasket, materials on order to provide a
wear-resistant contact surface.
Good distribution of pressure peaks;
Dispersion of air and moisture;
Easy washable and dryable;
Recyclable and non-poisonous.
Perfort performance in salty water;
Low pressure drop;
High collection efficiency;
Fast delivery and service;
Custom-designed for specific applications;
Efficient and economical for a wide range of applications;
It is convenient for installation, operation and maintenance.
Knitted Wire Mesh can be used for General Filtration, Filtration
& Separation Supports and Industrial Mesh Supports &
Inlays. Knitted wire mesh is also commonly used within our product
groups Filters & Filter Elements and Mist Eliminators &
Coaleshers (Reactor Internals).
|Model||Material||Wire Diameter||Mesh Width||Mesh Length|
1. 200-400 model: it has 200 openings in the mesh width of 400mm.
2. Common wire diameter includes 0.20mm, 0.23mm, 0.25mm, 0.28mm.
3. The mesh can be made into single strand, double strand,
4. The surface include flattened and crimped.
Packing: Knitted wire mesh is packed in rolls or plastic spools ,wrapped in
moisture-proof paper or plastic film, sutside wooden cases or